Countertop & Wall Tile - Shower Surround 
 
Considerations:
 
  - One of the      first things to take into consideration when choosing a tile for a tub or      shower is the size. Larger tiles help make an area appear larger, but if      you only have a 3’ wall a 20x20 tile will be too large. It is best to find      the balance between the size of the tile and the size of the wall being      covered. 
- If you      choose a decorative pattern for your tile, consider where your plumbing      valves will end up. You don’t want a body spray to end up right in the      middle of your decorative accent!
- If you      choose a large format wall tile for your shower, you will need a      coordinating tile for the shower floors that is small enough to be able to      make the pitch on the shower floor. Typically,  4x4, 6x6 or mosaic tiles work best, depending on the      size of the shower. 
- If you are      implementing a design element into a shower or tub/shower that you want to      feature, consider that a clear frameless shower door will show off that      accent the most and a shower curtain will hide it the most. 
- Choosing to mix different tiles to create a pattern in encouraged, but be careful about mixing tiles with different thicknesses. Check with your tile designer or tile setter to see if your choices will work together for a smooth installation.
Options:
  - Run the      tile all the way up to the ceiling or stop around 8’ above the finished      floor height.
- Finishing      the tile – be sure to find out if the tile you select has a coordinating      bullnose to finish off the edges of the last piece of tile.
- For a      tub/shower you will have the choice to stop the bullnose or finishing      element at the top of the tub or continue running it to the floor.
- Consider      if your tile choice looks better with small or larger grout lines.
- Using a sealer for your grout to help prevent mold and mildew issues
Decorative Design Options:
 
  - Set the      tile square or straight lay with no added options
- Set the      tile at a 45 degree angle or on the diagonal
- Set the      tile with a brick joint or running bond pattern
- Add a      decorative listello at the top, bottom or eye level (straight or diagonal      lay)
- Clip the      corners of the tiles turned on the diagonal and insert a decorative “dot’      made from tile, metal, glass or stone
- Alternate      colors to make a checkerboard pattern
- Mix some      of the elements above and set the tile straight, but turn one row at eye      level on the diagonal. This can be outlined with a listello at the top and      the bottom of the diagonal band or a decorative dot can be inserted in      between the diagonal tiles
- If you have a large enough wall, add a feature like a decorative picture frame. This can be created with a listello as the frame and it gives you the option of the choices listed above to accent the interior. 
Accessories
  - In your      shower you can add a corner seat or shower bench, towel bar, soap dish,      corner shelf or recessed niche
- Some shower drains are offered in round or square shapes and a variety of colors that can be matched or coordinated to your shower valve colors.
